N3RTEX-CNT2
네트워크 제품
· Panasonic RTEX (Realtime Express)프로토콜 기반
· 2ch 카운터 슬레이브 모듈
· 100Mbps Full duplex
· 카운터 입력 2ch (Max. 4MHz)
· Trigger 2ch (Differential, TTL, Open-collector)
· 제품 상태 표시 LED 내장
제품사양
| 항목 | 사양 |
|---|---|
| Number of node | 1 node |
| Module function | RTEX based 2ch Counter function module |
| Slave ID setting | Decimal number rotary switch x2 (0~31) |
| Mounting method | Standard 35mm DIN rail mounting |
| LED display | Power(Yellow), Link(Green), Error(Red), Communication(Green) |
| Encoder input velocity | Max. 4MHz |
| Encoder count range | 28 bit |
| Countinput signal | Signal : ENC A+,A-,B+,B-,Z+,Z- Input type : Differential input (Line Receiver) Signal leve : ANSI TIA/EIA-422-B Line Receiver |
| Trigger output | Signal : TRG+/-, TTL 5V TRG, TRG OC Trigger Pulse holding time : 1us ~ 50ms Type : Differential, TTL(5VDC Level), Open-collector(24VDC Level) |
| Connector | Comm. RJ45 LAN x 2EA CNT. D-SUB 25pin x 1EA |
| Power supply / Current consumption | DC 24V/Max. 200mA (Connected to back plane inside the module) |
| Operating temperature / Humidity | Temperature 0 ~ 55°C / Humidity 5~90% (No condensation) |
| Storage temperature | -20 ~ 70°C |
| Weight | 195g |
| Exterior dimension of product | 112(H) mm x 90(D) mm x 44(W) mm |
다운로드
MANUAL
| H/W | CAD | Wire Drawing |
|---|---|---|
|
|
좌우 너비가 좁은 화면에서 내용이 보이지 않을 경우,
좌우로 스크롤(스와이프)하시면 모든 입력란을 보실 수 있습니다.
SOFTWARE more
| UC | UC(ECAT) | (Old S/W) RM | (Old S/W) AXT | (Old S/W) AXL |
|---|---|---|---|---|
 |